loading

Especializados en Repetidores de Señal & Bloqueador R&D y fabricación desde 2006

Repetidor selectivo digital tribanda simple y doble serie S33T de AMPLITEC con baja pérdida 1
Repetidor selectivo digital tribanda simple y doble serie S33T de AMPLITEC con baja pérdida 1

Repetidor selectivo digital tribanda simple y doble serie S33T de AMPLITEC con baja pérdida

* Carcasa de aleación de aluminio de alta calidad, buena disipación de calor.

* Indicación LED de alarma.

* Función AGC especial para ventiladores eléctricos.

* Atenuación de ganancia manual, con pasos de 1 dB para atenuar la ganancia entre el rango de 1 y 30 dB.

* ALC podría limitar la potencia de salida para garantizar una cobertura estable.

* Admite 3 subbandas y cada ancho de banda es de un máximo de 24 MHz.

* Se puede controlar y monitorear, a través de RS232 se conecta a la PC para control local, a través de módem GSM se conecta a la PC para control remoto.

5.0
design customization

    UPS...!

    No hay datos de producto.

    ir a la página de inicio

    Amplitec S33T series digital mobile signal repeater is used to extend mobile providers' networks. These repeater are  cellular solutions with easy installation, which enable operators to improve signal coverage without establishing new BTS. The repeater is adjusted strictly to the bandwidth at which mobile provider performs. It support 3 sub-bands and up to 12 channels per customer’s request. In case it’s necessary to change the band frequency, the user can easily do it thanks to the SDR technology in the digital repeater.
        The repeater has Digital IF SAW filter technology. Support 3 sub-bands and each bandwidth is with maximum 24MHz.
    It can upgrade the underlying FPGA code with the help of the upper software to change the frequency-selecting and band-selecting mode, and it also can make a flexible configuration to the parameters, such as the operation bandwidth and so on.

    It can be controlled and monitored, via RS232 connecting PC for local control, via GSM modem connecting PC for remote control, set the frequency and ATT of UL or DL, check the output power of UL or DL, and check the temperature alarm and ALC alarm via the OMT.


    Standard Package  
    1) AC power cord (EU standard/ US standard/ UK standard/ SA standard/ China standard etc.)  1PCS 
    2) Installation kit 1PCS 
    3) User manual 1PCS                    

    موارد

    Uplink

    Downlink

    Frequency Range

    1850 ~ 1915 MHz

    1930 ~ 1995 MHz

    Working Bandwidth (Frequency can be set by software)

    0.2~24 MHz(in steps of 200 KHz)

    0.2~24 MHz(in steps of 200 KHz)

    Number of sub-band

    1~3

    1~3

    Output Power  

    24±2 dbm

    33±2 dbm

    Gain

    75±3 دسی بی

    80±3 دسی بی

    Ripple

    Type<000000>le;4 dB

    Type<000000>le;4 dB

    VSWR

    <000000>le;2

    <000000>le;2

    Intermodulation Products(CW)

    <000000>le; -45dBc

    <000000>le; -36dBc

    Spurious Emission

    9KHz~1GHz

    <000000>le; -36dBm

    1GHz~12.75GHz

    <000000>le; -30dBm

    ALC Active 10dB

    ∣△∣<000000>le;2dB

    ∣△∣<000000>le;2dB

    حداکثر Input Power Without Damage

     -10dBm

    -10dBm

    ATT step of 1dB

    1 ~ 10dB

    ∣△∣<000000>le;1dB

    ∣△∣<000000>le;1dB

    10 ~ 20dB

    ∣△∣<000000>le;1dB

    ∣△∣<000000>le;1dB

    20 ~ 30dB

    ∣△∣<000000>le;1.5dB

    ∣△∣<000000>le;1.5dB

    Out of Band Gain

    ± 600 khz

    <000000>le;50 dB

    <000000>le;50 dB

    ± 1 mhz

    <000000>le;35 dB

    <000000>le;35 dB

    ± 5 mhz

    <000000>le;25 dB

    <000000>le;25 dB

    Noise Figure @ max. gain

    <000000>le;6 dB

    <000000>le;6 dB

    Time Delay

    <000000>le;13 μs

    <000000>le;13 μs

    Alarm

    ALC not Active

    Green

    ALC Active 5~10dB

    Orange

    ALC Active 15~20dB

    Red

    Power LED

    Power ON

    Green

    Power OFF

    No Light

    Local Control Or Remote Control

    1.UL&DL Gain

    2. Frequency

    Monitoring and control

    Local

    RS232

    Remote

    GSM Modem

    RF Connector

    N-Female

    Environment Conditions

    IP40

    منبع تغذیه

    AC:220V  

    Power Consumption

    <000000>le;100W

    Humidity

    < 90%

    دمای عملیاتی

     -10℃~+55℃

    اندازه

    450*340*195میلی متر

    وزن

    21کیلوگرم

    Signal Booster

    mobile signal booster

    cell phone signal repeater

    * High-quality aluminum alloy shell, good heating dissipation.

    * Alarm LED indication.

    * AGC function special for electric fans.

    * Manual gain attenuation, with 1dB step to attenuate the gain among 1-30dB range.

    * ALC could limit the output power to ensure stable coverage.

    * Support 3 sub-bands and each bandwidth is with maximum 24MHz.

    * Can be controlled and monitored, via RS232 connects PC for local control, via GSM modem connects PC for remote control.

    S33T Series Single Dual Tri Band Digital Selective Repeater

    Ponte en contacto con nosotros
    Simplemente deje su correo electrónico o número de teléfono en el formulario de contacto para que podamos enviarle una cotización gratuita para nuestra amplia gama de diseños
    Productos relacionados
    sin datos

    Teléfono: +86-757-83308238,13715513766

    Correo electrónico:  info@amplitec.cn

    Dirección: 4to Piso, 4to Edificio, No. 60 de Langbao West Road, distrito de Chancheng, ciudad de Foshan, Guangdong, China. 528000

    Copyright © 2025 Guangdong Amplitec Tech Development Co., Ltd. - www.amplitec.net | Mapa del sitio
    Contáctenos
    whatsapp
    Póngase en contacto con el servicio al cliente
    Contáctenos
    whatsapp
    cancelar
    Customer service
    detect