Especializados en Repetidores de Señal & Bloqueador R&D y fabricación desde 2006
Repetidor de señal digital para exteriores AMPLITEC de 33 dBm con banda selectiva y baja pérdida para áreas rurales
* El 99% pasa el despacho de aduana, Amplitec tiene muchos certificados, como CE, RoHS, FCC, etc.
* Resuelve al 100% el problema de la señal débil del teléfono celular. Fácil de cubrir más de 3000-6000 m2 y fácil de instalar.
* La frecuencia de subbanda y el ancho de banda se pueden configurar mediante el panel de monitoreo local, lo que es más fácil y conveniente.
* La tecnología de filtro digital hace que el rechazo fuera de banda sea más efectivo
* La pantalla OLED puede mostrar claramente la frecuencia de trabajo, la ganancia, la potencia de salida y verificar fácilmente Estado de funcionamiento del dispositivo
* Función de control de ganancia manual, para atenuar la ganancia con pasos de 1 dB entre el rango de 31base de datos
* ALC, con un amplio rango de 31dB, limita automáticamente la potencia de salida para garantizar un rendimiento estable.
* El dispositivo detecta automáticamente el aislamiento después del inicio, para evitar la autooscilación.
* Se puede controlar y monitorear, a través de USB se conecta a la PC para control local, a través de módem 3G o 4G se conecta a la PC para control remoto.
*Amplitec handle many engineering cases around the world,we have rich experience in mobile phone signal coverage project.
*Amplitec Own Chinese the largest signal booster manufacturing factory , so our quality control and production capacity leading the world.
*Most of Amplitec's signal booster have certificates ,such as CE, RoHS, FCC, etc...
*Amplitec have rich exhibition experience, our signal boosters are recognized in many regions around the world.
-Do You Know Digital Band Selective Repeater?
-Digital Band Selective Repeater adopts digital filtering technology, uses A/D circuit to convert radio frequency signal into digital signal, and then uses programmable FPGA chip to run algorithm software to edit digital signal. One frequency band signal can be edited into multiple subbands, and then digital The signal is converted into a radio frequency signal, and each subband processed by digital filtering has good out-of-band suppression performance and will not interfere with each other. Therefore, installing a Digital Band Selective Repeater can simultaneously support the networks of multiple operators in the same frequency band.
-In addition, the equipment maintenance engineer can operate the monitoring software to turn on or turn off any subband of the Digital Band Selective Repeater, and can also flexibly set bandwidth and frequency of any sub-band , and choose to support the network of a certain operator or multiple operators.
-Recommended repeater antennas accessories full sets including:
Modello | S33T-Bx S33T-BxBx S33T-BxBxBx |
Frequency Band | Any one in band 1, 2, 3, 4, 5, 7, 8, 20, 25, 28, 66 @ S33T-Bx Any two in band 1, 2, 3, 4, 5, 7, 8, 20, 25, 28, 66 @ S33T-BxBx Any three in band 1, 2, 3, 4, 5, 7, 8, 20, 25, 28, 66 @ S33T-BxBxBx |
Sub-bands | 1~3 for each band |
Bandwidth | 0.2 ~ 20 MHz can by set for each sub-band |
Gain | UL 80dB , DL 85dB |
Output Power | UL 23dBm, DL 33dBm |
Gain Attenuate | 1~31dB, Step of 1dB |
ALC Control Range | <000000>ge;30dB |
VSWR | <000000>le;2.0 |
Spurious Emission | <000000>le;-36dBm @ 9KHz~1GHz <000000>le;-30dBm @ 1GHz~12.75GHz |
ACRR | Fully comply with 3GPP |
EVM | Fully comply with 3GPP |
PCDE | Fully comply with 3GPP |
Out of band Gain | Fully comply with 3GPP |
Noise Figure | <000000>le;6dB @ S33T-Bx <000000>le;8dB @ S33T-BxBx, @ S33T-BxBxBx |
Group Delay | <000000>le;13μS |
Power Supply | DC 27V 5A @ S33T-Bx AC 100~264V / 50Hz @ S33T-BxBx, @ S33T-BxBxBx |
Dimension | 330x268x58mm @ S33T-Bx 370x332x137mm @ S33T-BxBx 490x410x210mm @ S33T-BxBxBx |
Peso | <4.5kg @ S33T-Bx <15kg @ S33T-BxBx <28kg @ S33T-BxBxBx |
Note ： The letter "x" means the 3gpp 4G band number: 1, 2, 3, 4, 5, 7, 8, 20, 25, 28, 66 | |
* 99% pass customs clearance,Amplitec have many certificates,such as CE,RoHS,FCC,etc...
* 100% solve mobile cell phone weak signal problem Easy to cover over 3000-6000 m2 and easy to install.
* Sub-band frequency and bandwidth can be set by local monitoring panel, which is easier and more convenient
* Digital filter technology makes out-of-band rejection more effective
* OLED screen can clearly display working frequency, gain, output power and easily check working status of the device
* Manual gain control function, to attenuate gain with 1dB step among range of 31db
* ALC, with wide range of 31dB, auto limit the output power to ensure stable performance.
* Device auto detect isolation after start-up, to avoid self-oscillation.
* Can be controlled and monitored, via USB connects PC for local control, via 3G or4G modem connects PC for remote control.
Enlaces útiles
Teléfono: +86-757-83308238,13715513766
Correo electrónico: info@amplitec.cn
Dirección: 4to Piso, 4to Edificio, No. 60 de Langbao West Road, distrito de Chancheng, ciudad de Foshan, Guangdong, China. 528000